Different maintenance methods for different stones

Stone protection is to use some methods such as brushing, spraying, coating, rolling, drenching and soaking, so that the protective agent is evenly distributed on the surface of the stone or penetrates into the stone to form a kind of protection, making the stone waterproof, antifouling and acid-resistant Alkali, anti-aging, anti-freeze-thaw, anti-bio-erosion, and other functions, so as to achieve the effect of improving the service life of stone and decorative performance.

The commonly used stones are mainly divided into natural stone and artificial stone. Natural stone is divided into three types: marble, limestone, and granite.

1. Marble

Its main components are calcite and calcium carbonate, with a Mohs hardness value of about 4.5, which is soft, poor in acid and alkali resistance and weathering resistance, easily absorbs oil, water, and other liquids and is easily scratched.

The best protection for polished marble is to use a permeable waterproof and oil-proof protective agent as pre-protection before the marble is put into use. Daily use of neutral cleaning agents for regular cleaning, acid cleaning agents should not be used for cleaning.

2. Limestone

Its main component is calcite. It is relatively soft, easily absorbs oils and other aqueous liquids, is easily scratched and corroded by acidic substances, and is more susceptible to contamination than marble.

Most limestones are porous and absorbent. Some limestones are semi-metamorphic rocks with the same physical properties as metamorphic marble. It can be used to lay the ground. It is recommended that after the surface of the limestone is treated with a penetrating protective agent, it should be cleaned regularly with a neutral cleaning agent every day.

Diamond wire saw cutting machine using frequency converter + PLC control, the motor can be stepless speed regulation and digital communication, the control circuit is simple and the failure rate is low. The Control panel is a fixed HML screen. It's waterproof and dust-proof, which also has dynamic display images and working information, like input voltage, cutting data, and working time. Intelligent fault detection of equipment system, alarm protection and prompt solutions, timely treatment, User-friendly. It using PID technology, the machine can be adjust feeding speed automatically according to the changing load of the main motor, which keeps the wire tension constant and extend the wire life span.

3. Granite

It is mainly composed of quartz (35%), feldspar (45%), and potassium elements. The Mohs hardness is about 6.5, the color is usually dark, and some also contain a very small amount of calcite. Because of its greater hardness, granite Acid and alkali resistance, strong weather resistance.

However, there are also pores on the surface, which is highly absorbent and contaminated. It is recommended to use a penetrating protective agent for pre-treatment. You can use a neutral or weak acid cleaning agent for daily cleaning.

4. Artificial stone

The natural stone of different specifications is used as aggregate, and it is made of organic (resin) or inorganic (cement) polymer materials. It is made of scientific formula, and the average bending strength should not be less than 5.0MPa. The minimum value of a single block shall not be less than 4 OMPa, which is suitable for the ground, stove, and other places. Daily maintenance can use a neutral or weak alkaline cleaning agent.

Besides diamond wire saw cutting machine, We have Curbstone/kerbstone/paver stone cutting machine line, automatic polishing machine, block cutters, laser bridge cutter, quarry mining machine and so on.

Contact:

Daisy Huang

Whatsapp&wechat:+86 18859970759

Email:daisy@dafonmachine.com

Website:dafonmachine.com