Will the quartz stone countertops bleed?

Quartz stone is the first choice for home improvement, it is a perfect combination of natural stone and artificial stone, and it is a higher breakthrough in decorative stone. Recently, everyone has paid much attention to the problem of the bleeding of quartz stone countertops. Whether or not quartz stone will penetrate, many merchants explain that it will not. The merchant will tell you that the surface of the quartz stone is smooth, without any capillary holes and small cracks. It is a brand-new artificial stone, which is completely different from the ordinary artificial stone production process and is produced by a new die-casting process. This is one of the reasons why quartz stone manufacturers separate it from ordinary artificial stone.

Quartz stone adopts a new production technology and process. Quartz stone through a vacuum (vacuum to achieve the requirements of -0.098Mpa or more), high pressure and high vibration to make the plate density reach 2.3-2.6g / cm3, the water absorption rate is as low as 0.02%, so Said that the liquid is difficult to penetrate into the inside of the plate. And the staff at the cabinet store will also give us some anti-permeation experiments. Many of them will think of using a marker pen. If they can wipe off, it means that the plate is anti-permeation, and some stores will even use a transparent container filled with soy sauce. Quartz-like pieces invade and continue to soak. However, some households will bleed the countertop board after using it for a period of time. What is the reason? What's so greasy in it?

Chamfering assembly line has replaced the previous curbstone mainly relying on artificial chamfering and polishing, which completely solved the situation of high labor intensity, low efficiency, and high cost. The entire assembly line is seamlessly connected, the linkage between the devices is achieved by the intermediate transition frame and the flap frame device. The chamfering position adopts the popular lower chamfering degree, the chamfering precision is high, and can be chamfer rounded corners, at the end of the addition of polish, achieved the rounded corners of the polish problem.

If the bleed of your own countertop is serious, the price of the quartz stone you purchased is cheaper and the quality is definitely worse, because the plate produced by the domestic brand quartz stone manufacturer is unlikely to have a serious bleed. This is why you are taught to use a marker to make an experiment when you buy. You should use a dry rag to wipe the board vigorously before doing the experiment. Why should you understand why you want to wipe it! However, the penetration of rust water has little to do with the quality and density of the plate, because the plate itself is not zero water absorption rate, and rust water is very corrosive, and it is no exception to quartz stone, quartz sand itself is a natural mineral, A certain dilution of iron. Therefore, we should avoid contact with rusty irons in use, and after use, the table should be wiped with a dry rag to keep the table dry.

In addition to stone chamfering machine , We also produce Curbstone/kerbstone/paver stone cutting machine line, Infrared bridge type cutter, stone polishing machine, full automatic edge cutting machine line, multiblade stone block cutter, flaming machine, bush hammer machine, diamond wire saw machine, quarry mining machine, stone splitting machine, stone crushing machine and all sorts of stone cutting and processing machines. 

Contact:

Daisy Huang

Whatsapp&wechat:+86 18859970759

Email:daisy@dafonmachine.com

Website:dafonmachine.com