Methods to prevent quartz stone fracture

1. When designing plane splicing, the physical granite slab cutting machine  stone block cutting machine properties of quartz stone should be considered to avoid the consequences of joint cracking due to thermal expansion and contraction or stress concentration. When selecting the connection position, the force of the plate must be fully considered. Avoid connecting at corners or furnace openings.

2. When designing the corners of the table, full consideration should be given to stress concentration, which will cause cracks bridge cutting machine   at the corners of the table. Therefore, all corners should be kept at a radius of 25mm or stone bridge saw   more during processing.

3. When designing the hole position, the hole position should be cnc bridge saw   greater than or equal to 80mm from the edge of the table to prevent the hole position from cracking, and the corner of the hole should be rounded with a radius of more than 25mm.

4. When installing the countertop, there should be a 2-4mm expansion gap between the countertop and the wall to effectively ensure that the granite edge cutting machine   countertop does not crack due to thermal expansion and contraction. The tabletop should keep a maximum distance of no more than 600 mm from the support frame or support plate to reduce deformation or even breakage of the tabletop;

5. In daily use, avoid cracking caused by external factors, such as: don't hit the quartz stone countertop by gravity, don't directly touch the block cutting saw   pot or utensil with extremely high temperature to the countertop, etc., you can put a layer of the marble cutting machine manufacturers   heat insulation layer.