Method for preventing quartz stone from cracking

In order to prevent the quartz stone from breaking, we should pay attention to:

1. When designing the plane splicing, the physical properties of the quartz stone should be considered to avoid the consequences of joint cracking due to thermal expansion and contraction or stress concentration. When selecting the connection position, the stress of the plate must be fully considered. Avoid connecting at corners or furnace mouth.

2. When designing the corner of the table, the stress concentration should be fully considered, which causes cracking at the corner of the table. Therefore, all the corners should be kept at a radius of 25mm or more during processing.

3. When designing the opening position, the opening position should be greater than or equal to 80mm from the edge of the table to prevent cracking of the hole position. The corner of the opening should be kept at a radius of 25mm or more.

Automatic continuous bush hammer machine imitates the principle of polishing machine, through polishing improvement and program transformation, it becomes a new type of continuous litchi noodle machine. The equipment has high efficiency, simple operation, uniform processing effect, and labor-saving. It is ideal equipment for surface treatment. The equipment is automatically adjusted and has the same depth of play. Low cost and high efficiency.

Besides bush hammer machine, dafon Curbstone/kerbstone/paver stone cutting machine line, manual/automatic polishing machine, granite/marble block cutting machine, laser bridge cutter, bottom slab cutting machine, hand edge cutting machine, calibration machine, quarry equipment, automatic loader, chamfering machine and so on.

4. When the table is installed, there should be a 2-4mm expansion gap between the table and the wall to effectively ensure that the table does not crack due to thermal expansion and contraction. The table should be kept at a maximum distance of no more than 600 mm from the support frame or support plate to reduce table deformation or even breakage;

5.  In the daily use process, it is also necessary to avoid cracking caused by external factors, such as: do not gravity hit the quartz stone countertop, do not directly touch extremely high-temperature pots or utensils, etc., you can pad a layer of heat insulation.

Contact:

Daisy Huang

Whatsapp&wechat:+86 18859970759

Email:daisy@dafonmachine.com

Website:dafonmachine.com