Comparison of the cost of kerb stone and traditional mid-cut

Dafon Machinery Kerb Stone Complete Equipment Production Advantages

The traditional processing method of Kerb stone is to cut in the middle, take the processing of 120/300/600 mm specifications and 

the daily output of 25 cubic meters (20 hours) as an example:

Traditional medium-cut processing requires 1.5 large-cuts, and daily output of 5 cubic meters/set requires 5

If using a set of Dafon Kerb Stone Single-Pole Fixed Length Equipment:

1. Labor: can save 3-4 people (cost can save 60-70 yuan/cubic)

2. Site: Save about 2-3 sets of mid-cut positions

3.Blade: Because the Dafon kerb stone combination saw uses multiple saw blades and less cutting, the loss of the blade is reduced, the 

processing standard is improved, and the cost of the blade is saved by 20 yuan/cubic

Take the cutting of 0.15 * 0.15 * 1-meter road stone as an example

Type	medium-cut	Kerbstone combination saw
Segment cost	80 yuan/pcs	160 yuan/pcs
Output per segment （ m ³ ）	2.025	90m ³ /12pcs=7.5
The cost of per cubic per segment	80/2.025 is about 40 yuan	160/7.5=21.3 yuan

Comprehensive cost savings: around 80 yuan / cubic